MTD/SBD P90 Gasoline Motor Disassembly Tutorial

0 %

Course content

Introduction
- 1: Tools & Prep
Section 1.0 Flywheel Removal
- Section 1.0 Flywheel Removal (Part 1)
- Section 1.0 Flywheel Removal (Part 2)
Section 2.0 Intake System and Starter Removal
- Section 2.0 Intake System & Starter (Part 1)
- Section 2.0 Intake System & Starter (Part 2)
Section 3.0 Head Removal
- Section 3.0 Head Removal (Part 1: Valvetrain)
- Section 3.0 Head Removal (Part 2: Head Bolts)
Section 4.0 Closure Plate (Sump) Removal
- 4.0 Sump
Section 5.0 Crankcase Inspection
- Section 5.0 Crankcase
Section 6.0 Reassembly (Summary)
- Section 6.0 Reassembly (Summary) 10 xp
  - Quiz

Section 5.0 Crankcase

Fullscreen Share

Remove Camshaft.

Remove and Collect the alignment pins (2), Shims(4), and Tappets (2x) that may be on the floor now.

Remove Counter-Balance Shafts

About
Comments

Commenting is not enabled on this course.